gclib_errors.h File Reference

Go to the source code of this file.

Defines
#define	G_NO_ERROR   0
	Return value if function succeeded.
#define	G_NO_ERROR_S   "no error"
#define	G_GCLIB_ERROR   -1
	General library error. Indicates internal API caught an unexpected error. Contact Galil support if this error is returned, softwaresupport@galil.com.
#define	G_GCLIB_ERROR_S   "gclib unexpected error"
#define	G_GCLIB_UTILITY_ERROR   -2
	An invalid request value was specified to GUtility.
#define	G_GCLIB_UTILITY_ERROR_S   "invalid request value or bad arguments were specified to GUtility()"
#define	G_GCLIB_UTILITY_IP_TAKEN   -3
#define	G_GCLIB_UTILITY_IP_TAKEN_S   "ip address is already taken by a device on the network"
#define	G_GCLIB_NON_BLOCKING_READ_EMPTY   -4
	GMessage, GInterrupt, and GRecord can be called with a zero timeout. If there wasn't data waiting in memory, this error is returned.
#define	G_GCLIB_NON_BLOCKING_READ_EMPTY_S   "data was not waiting for a zero-timeout read"
#define	G_TIMEOUT   -1100
	Operation timed out. Timeout is set by the --timeout option in GOpen() and can be overriden by GSetting().
#define	G_TIMEOUT_S   "device timed out"
#define	G_OPEN_ERROR   -1101
	Device could not be opened. E.G. Serial port or PCI device already open.
#define	G_OPEN_ERROR_S   "device failed to open"
#define	G_INVALID_PREPROCESSOR_OPTIONS   -1204
	GProgramDownload was called with a bad preprocessor directive.
#define	G_INVALID_PREPROCESSOR_OPTIONS_S   "preprocessor did not recognize options"
#define	G_COMMAND_CALLED_WITH_ILLEGAL_COMMAND   -1106
	GCommand() was called with an illegal command, e.g. ED, DL or QD.
#define	G_COMMAND_CALLED_WITH_ILLEGAL_COMMAND_S   "illegal command passed to command call"
#define	G_DATA_RECORD_ERROR   -1107
	Data record error, e.g. DR attempted on serial connection.
#define	G_DATA_RECORD_ERROR_S   "data record error"
#define	G_UNSUPPORTED_FUNCTION   -1109
	Function cannot be called on this bus. E.G. GInterrupt() on serial.
#define	G_UNSUPPORTED_FUNCTION_S   "function not supported on this communication bus"
#define	G_FIRMWARE_LOAD_NOT_SUPPORTED   -1110
	Firmware is not supported on this bus, e.g. Ethernet for the DMC-21x3 series.
#define	G_FIRMWARE_LOAD_NOT_SUPPORTED_S   "firmware cannot be loaded on this communication bus to this hardware"
#define	G_ARRAY_NOT_DIMENSIONED   -1200
	Array operation was called on an array that was not in the controller's array table, see LA command.
#define	G_ARRAY_NOT_DIMENSIONED_S   "array not dimensioned on controller or wrong size"
#define	G_ILLEGAL_DATA_IN_PROGRAM   -1202
	Data to download not valid, e.g. \ in data.
#define	G_ILLEGAL_DATA_IN_PROGRAM_S   "illegal ASCII character in program"
#define	G_UNABLE_TO_COMPRESS_PROGRAM_TO_FIT   -1203
	Program preprocessor could not compress the program within the user's constraints.
#define	G_UNABLE_TO_COMPRESS_PROGRAM_TO_FIT_S   "program cannot be compressed to fit on the controller"
#define	G_BAD_RESPONSE_QUESTION_MARK   -10000
	Operation received a ?, indicating controller has a TC error.
#define	G_BAD_RESPONSE_QUESTION_MARK_S   "question mark returned by controller"
#define	G_BAD_VALUE_RANGE   -10002
	Bad value or range, e.g. GCon *g* variable passed to function was bad.
#define	G_BAD_VALUE_RANGE_S   "value passed to function was bad or out of range"
#define	G_BAD_FULL_MEMORY   -10003
	Not enough memory for an operation, e.g. all connections allowed for a process already taken.
#define	G_BAD_FULL_MEMORY_S   "operation could not complete because of a memory error"
#define	G_BAD_LOST_DATA   -10004
	Lost data, e.g. GCommand() response buffer was too small for the controller's response.
#define	G_BAD_LOST_DATA_S   "data was lost due to buffer or fifo limitations"
#define	G_BAD_FILE   -10005
	Bad file path, bad file contents, or bad write.
#define	G_BAD_FILE_S   "file was not found, contents are invalid, or write failed"
#define	G_BAD_ADDRESS   -10006
	Bad address.
#define	G_BAD_ADDRESS_S   "a bad address was specified in open"

---

Detailed Description

Defines values for the Galil C Library return codes and error strings.

Definition in file gclib_errors.h.