
	API Docs for SAX and DOM

XMLValidator Class Reference

This abstract class provides the interface for all validators. More...

Inheritance diagram for XMLValidator:

[legend]List of all members.


Public Member Functions
bool	checkRootElement (const unsigned int)
	DEPRECATED.
Destructor
virtual	~XMLValidator ()
	The derived class should clean up its allocated data, then this class will do the same for data allocated at this level.
Virtual validator interface
virtual int	checkContent (XMLElementDecl const elemDecl, QName *const children, const unsigned int childCount)=0
	The derived class should look up its declaration of the passed element from its element pool.
virtual void	faultInAttr (XMLAttr &toFill, const XMLAttDef &attDef) const =0
	The derived class should fault in the passed XMLAttr value.
virtual void	preContentValidation (bool reuseGrammar, bool validateDefAttr=false)=0
	This method is called by the scanner after a Grammar is scanned.
virtual void	postParseValidation ()=0
	This method is called by the scanner after the parse has completed.
virtual void	reset ()=0
	This method is called by the scanner before a new document is about to start.
virtual bool	requiresNamespaces () const =0
	The derived class should return a boolean that indicates whether it requires namespace processing or not.
virtual void	validateAttrValue (const XMLAttDef attDef, const XMLCh const attrValue, bool preValidation=false, const XMLElementDecl *elemDecl=0)=0
	The derived class should apply any rules to the passed attribute value that are above and beyond those defined by XML 1.0.
virtual void	validateElement (const XMLElementDecl *elemDef)=0
	The derived class should apply any rules to the passed element decl that are above and beyond those defined by XML 1.0.
virtual Grammar *	getGrammar () const =0
	Retrieve the Grammar used.
virtual void	setGrammar (Grammar *aGrammar)=0
	Set the Grammar.
Virtual DTD handler interface
virtual bool	handlesDTD () const =0
	This method allows the scanner to ask the validator if it handles DTDs or not.
Virtual Schema handler interface
virtual bool	handlesSchema () const =0
	This method allows the scanner to ask the validator if it handles Schema or not.
Setter methods
void	setScannerInfo (XMLScanner const owningScanner, ReaderMgr const readerMgr, XMLBufferMgr *const bufMgr)
void	setErrorReporter (XMLErrorReporter *const errorReporter)
	This method is called to set an error reporter on the validator via which it will report any errors it sees during parsing or validation.
Error emittor methods
void	emitError (const XMLValid::Codes toEmit)
	This call is a convenience by which validators can emit errors.
void	emitError (const XMLValid::Codes toEmit, const XMLCh const text1, const XMLCh const text2=0, const XMLCh const text3=0, const XMLCh const text4=0)
void	emitError (const XMLValid::Codes toEmit, const char const text1, const char const text2=0, const char const text3=0, const char const text4=0)
Static Public Member Functions
static void	reinitMsgMutex ()
static void	reinitMsgLoader ()
Protected Member Functions
	XMLValidator (XMLErrorReporter *const errReporter=0)
const XMLBufferMgr *	getBufMgr () const
XMLBufferMgr *	getBufMgr ()
const ReaderMgr *	getReaderMgr () const
ReaderMgr *	getReaderMgr ()
const XMLScanner *	getScanner () const
XMLScanner *	getScanner ()

Detailed Description

This abstract class provides the interface for all validators.

This is the simple amount of API that all validators must honor, in order for the scanner to use them to do validation. All validators will actually contain much more functionality than is accessible via this common API, but that functionality requires that you know what type of validator you are dealing with.

Basically, at this level, the primary concern is to be able to query core information about elements and attributes. Adding decls to the validator requires that you go through the derived interface because they all have their own decl types. At this level, we can return information via the base decl classes, from which each validator derives its own decl classes.

Constructor & Destructor Documentation

virtual XMLValidator::~XMLValidator ( ) [virtual]

The derived class should clean up its allocated data, then this class will do the same for data allocated at this level.

XMLValidator::XMLValidator ( XMLErrorReporter *const errReporter = 0 ) [protected]

Member Function Documentation

virtual int XMLValidator::checkContent ( XMLElementDecl *const elemDecl,

QName **const children,

const unsigned int childCount

) [pure virtual]

The derived class should look up its declaration of the passed element from its element pool.
It should then use the content model description contained in that element declaration to validate that the passed list of child elements are valid for that content model. The count can be zero, indicating no child elements.
Note that whitespace and text content are not validated here. Those are handled by the scanner. So only element ids are provided here.

Parameters:

elemDecl The element whose content is to be checked.

children An array of element QName which represent the elements found within the parent element, i.e. the content to be validated.

childCount The number of elements in the childIds array. It can be zero if the element had none.

bool XMLValidator::checkRootElement ( const unsigned int )

DEPRECATED.
For those validators that contrain the possible root elements of a document to only particular elements, they should use this call to validate that the passed root element id is a legal root element.

void XMLValidator::emitError ( const XMLValid::Codes toEmit,

const char *const text1,

const char *const text2 = 0,

const char *const text3 = 0,

const char *const text4 = 0

)

void XMLValidator::emitError ( const XMLValid::Codes toEmit,

const XMLCh *const text1,

const XMLCh *const text2 = 0,

const XMLCh *const text3 = 0,

const XMLCh *const text4 = 0

)

void XMLValidator::emitError ( const XMLValid::Codes toEmit )

This call is a convenience by which validators can emit errors.
Most of the grunt work of loading the text, getting the current source location, ect... is handled here.
If the loaded text has replacement parameters, then text strings can be passed. These will be used to replace the tokens {0}, {1}, {2}, and {3} in the order passed. So text1 will replace {0}, text2 will replace {1}, and so forth.
textX Up to four replacement parameters. They can be provided as either XMLCh strings, or local code page strings which will be transcoded internally.

Parameters:

toEmit The error code to emit. it must be one of the defined validator error codes.

virtual void XMLValidator::faultInAttr ( XMLAttr & toFill,

const XMLAttDef & attDef

) const [pure virtual]

The derived class should fault in the passed XMLAttr value.
It should use the passeed attribute definition (which is passed via the base type so it must often be downcast to the appropriate type for the derived validator class), to fill in the passed attribute. This is done as a performance enhancement since the derived class has more direct access to the information.

XMLBufferMgr * XMLValidator::getBufMgr ( ) [protected]

const XMLBufferMgr * XMLValidator::getBufMgr ( ) const [protected]

virtual Grammar* XMLValidator::getGrammar ( ) const [pure virtual]

Retrieve the Grammar used.

ReaderMgr * XMLValidator::getReaderMgr ( ) [protected]

const ReaderMgr * XMLValidator::getReaderMgr ( ) const [protected]

XMLScanner * XMLValidator::getScanner ( ) [protected]

const XMLScanner * XMLValidator::getScanner ( ) const [protected]

virtual bool XMLValidator::handlesDTD ( ) const [pure virtual]

This method allows the scanner to ask the validator if it handles DTDs or not.

virtual bool XMLValidator::handlesSchema ( ) const [pure virtual]

This method allows the scanner to ask the validator if it handles Schema or not.

virtual void XMLValidator::postParseValidation ( ) [pure virtual]

This method is called by the scanner after the parse has completed.
It gives the validator a chance to check certain things that can only be checked after the whole document has been parsed, such as referential integrity of ID/IDREF pairs and so forth. The validator should just issue errors for any problems it finds.

virtual void XMLValidator::preContentValidation ( bool reuseGrammar,

bool validateDefAttr = false

) [pure virtual]

This method is called by the scanner after a Grammar is scanned.

static void XMLValidator::reinitMsgLoader ( ) [static]

static void XMLValidator::reinitMsgMutex ( ) [static]

virtual bool XMLValidator::requiresNamespaces ( ) const [pure virtual]

The derived class should return a boolean that indicates whether it requires namespace processing or not.
Some do and some allow it to be optional. This flag is used to control whether the client code's requests to disable namespace processing can be honored or not.

virtual void XMLValidator::reset ( ) [pure virtual]

This method is called by the scanner before a new document is about to start.
It gives the validator a change to reset itself in preperation for another validation pass.

void XMLValidator::setErrorReporter ( XMLErrorReporter *const errorReporter )

This method is called to set an error reporter on the validator via which it will report any errors it sees during parsing or validation.
This is generally called by the owning scanner.

Parameters:

errorReporter A pointer to the error reporter to use. This is not adopted, just referenced so the caller remains responsible for its cleanup, if any.

virtual void XMLValidator::setGrammar ( Grammar * aGrammar ) [pure virtual]

Set the Grammar.

void XMLValidator::setScannerInfo ( XMLScanner *const owningScanner,

ReaderMgr *const readerMgr,

XMLBufferMgr *const bufMgr

)

Parameters:

owningScanner This is a pointer to the scanner to which the validator belongs. The validator will often need to query state data from the scanner.

readerMgr This is a pointer to the reader manager that is being used by the scanner.

bufMgr This is the buffer manager of the scanner. This is provided as a convenience so that the validator doesn't have to create its own buffer manager during the parse process.

virtual void XMLValidator::validateAttrValue ( const XMLAttDef * attDef,

const XMLCh *const attrValue,

bool preValidation = false,

const XMLElementDecl * elemDecl = 0

) [pure virtual]

The derived class should apply any rules to the passed attribute value that are above and beyond those defined by XML 1.0.
The scanner itself will impose XML 1.0 rules, based on the type of the attribute. This will generally be used to check things such as range checks and other datatype related validation.
If the value breaks any rules as defined by the derived class, it should just issue errors as usual.

virtual void XMLValidator::validateElement ( const XMLElementDecl * elemDef ) [pure virtual]

The derived class should apply any rules to the passed element decl that are above and beyond those defined by XML 1.0.
If the value breaks any rules as defined by the derived class, it should just issue errors as usual.

The documentation for this class was generated from the following file:

XMLValidator.hpp

XMLValidator Class Reference

Public Member Functions

Static Public Member Functions

Protected Member Functions

Detailed Description

Constructor & Destructor Documentation

Member Function Documentation